Val Controls IHP24-BF - Page 39

DHP-UM-013
Val Controls A/S • Limfjordsvej 3 • DK-6715 Esbjerg N • Tel. +45 7547 0600 • Fax +45 7547 0611
vc@valcontrols.com • www.valcontrols.com
Revision: 4
39/58
4 Static Revision:
Length: 2 bytes
Read Only
Relative Index:
Length: 2 bytes
Read Only
Description: This alert is generated by any change to
the static data.
BLOCK_ALM
[Others]
21
1: Unacknowledged
Length: 1 bytes
Read Write
2: Alarm State
Length: 1 bytes
Read Only
3: Time Stamp
Length: 8 bytes
Read Only
4: Subcode
Length: 2 bytes
Read Only
5: Value
Length: 1 bytes
Read Only
Description: The block alarm is used for all
configuration hardware connected failure or system
problems in the block. The cause of the alert is
entered in the sub code field.
ALARM_SUM
[Others]
22
1: Current
Length: 2 bytes
Read Only
2: Unacknowledged
Length: 2 bytes
Read Only
3: Unreported
Length: 2 bytes
Read Only