10
Changing the tone of the beeper
The tone of the beeper can be changed in the following way:
• Press the < and > keys simultaneously.
• Press OK and select the tone function. The following indication will flash on the screen:
• Using the > key, select the tone level on a scale from 1 to 3.
Changing the display brightness
The brightness of the display can be changed from 1 to 9, where 1 is the darkest setting
and 9 is the brightest setting. The new values are entered if the clock is inactive (i.e. the
user has not touched any buttons for at least 7 seconds).
To adjust the brightness of the display:
• Press the < / > buttons simultaneously.
•
Use the OK button to select the bri function (pressing it once switches it to the tone mode
and a second time switches it to the bri mode).
• Use the < / > buttons to select the brightness: from 1 to 9 using the > button, and from
9 to 1 using the < button.
NOTE:
If the clock is activated, (i.e. the user has not touched any
sensor for at least 7 seconds), the brightness goes to the
maximum level.
Night mode
Between 22:00 PM and 6:00 AM, the display automatically dims.
B
Using the appliance
EN
To Next Page
Loading...
