7
Using the appliance
B
User guide
Before using the oven for the first time
•
Remove all packaging and clean the oven to eliminate any residue left by items of protective
packaging.
•
Remove all accessories from the oven and clean them in warm water with a cleaning agent.
•
Heat the oven to 250 °C, using the normal convection setting, for roughly 30 minutes,
remove all residue and wash thoroughly.
• Carefully clean the inside of the oven.
Clean the inside of the oven using warm water and just a small amount of cleaning product.
NOTE:
When you connect this appliance to the power supply for
the first time, or after a power failure, the symbols "0.00"
will appear on the electronic display. You must then set
the clock (see chapter Setting the clock).
The oven cannot be used if the clock is not set.
Using the control panel
Symbols displayed on the screen
- power-on symbol
- timer symbol
- cooking time symbol
operating mode selection button
less button
more button
EN
To Next Page
Loading...
