6
Overview of the appliance
A
Electrical connection
•
The oven must be powered by a single-phase AC system (230 V 1 N~50 Hz) and fitted with
a 3 x 1.5 mm
2
power cord, roughly 1.5 m long with an earthed outlet.
• The socket must be fitted with an earth wire and must not be positioned above the oven.
Once the oven is installed, ensure the electrical socket is easily accessible.
• Before plugging in, check that:
- the circuit breaker and electrical system can handle the load from the oven,
- the electrical installation is equipped with an effective earthed system that complies
with current standards and regulations,
- the socket is easily accessible.
NOTE:
If the fixed power cable is defective, to avoid any risk it must
be replaced by the manufacturer, in a repair centre or by
an authorised professional.
EN
To Next Page
Loading...
