2222
Practical information
C
EN
Emergencies
In every emergency situation, you should:
• turn the oven knobs to the 0 position,
• disconnect the appliance from the power supply,
• contact the after-sales service.
Minor issues can often be resolved by users, consulting the chart below. Before contacting
customer service or the after-sales service, consult this table:
PROBLEMS CAUSES SOLUTIONS
1. The appliance is not
working
Interruption to the electrical
supply
Check the fuse in the main
electrical panel, reconnect it
or replace it
2. The programmer
indicator shows the
time « 0.00 »
The appliance has been
disconnected or the power
supply has been interrupted
Set the timer on the
controller (see timer
instructions)
3. The oven light is not
working
Unscrewed or blown-out
bulb
Screw in or replace the bulb
(see chapter "Cleaning and
maintenance")
To Next Page
Loading...
