VSP-45 ohm
Issue 6
45 OHM TALKBACK INTERIOR SPEAKERS WITH LED
V-1060B V-1062B, V-1064B, V-1066B
INTRODUCTION
These instructions contain the specifications and
guidelines necessary to install, operate, and maintain
the 45 Ohm Talkback Interior Speaker Assemblies
with LED.
The 45 Ohm Talkback Interior Speaker Assemblies
with LED are for use with the Valcom "handsfree"
talkback page control units and provide both
loudspeaker and talkback functions with LED
indication in the monitor condition. These speakers
are for interior use only.
SPECIFICATIONS
Features
• 45 Ohm Impedance
• 8 Inch Speaker
• LED indicator
• Easy Hook-up (2 connections using house cable
or station wire)
Dimensions/Weights
V-1060B 8" Ceiling Speaker w/LED
13" Dia. X 2.5" D
(33.02cm Dia. x 6.35cm D)
2.4 lbs. (1.09 kg)
V-1062B Wall Speaker - wood grain with
light brown open weave grille –
10.6” H x 9.7” W x 5.2” D
(26.9cmH x 24.6cmW x 13.2cmD)
5.3 lbs. (2.41 kg)
V-1064B Corner Speaker - wood grain with
light brown open weave grille –
10.5”H x 9.75”W x 6.3”D
(26.7cmH x 24.1cmW x 16cmD)
3.6 lbs. (1.63 kg)
V-1066B Corridor Speaker - wood grain with
light brown open weave grille -
10.3"H x 10.3"W x 4.2"D
(26.2cmH x 26.2cmW x 10.7cmD)
5.7 lbs (2.59 kg)
Power Requirements
45 mA @ -24 Vdc max (for powering the LED)
Environment
Temperature -20 to +55
o
C
Humidity 0-95% non-precipitating
SYSTEM DESIGN
General
The 45 Ohm Talkback Speakers are designed to be
used with the Valcom "handsfree" talkback control
units. In combination with these units, they will
provide both loudspeaker and talkback functions with
LED indication.
1 947067
To Next Page
General
