EasyManua.ls Logo

Valeo Thermo E+ 120 - Page 8

Valeo Thermo E+ 120
65 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
202
Thermo E+ 120/200/320 2 Technical Data
2.2 Fuel
Suitable fuel is the diesel fuel specified by the vehicle
manufacturer. Only the on the model plate of the heater
specified fuel must be used.
The following table lists the by Valeo approved fuels and
their specifications.
*
Further information on approved fuels contain the TIs
(Technical Information) Biodiesel and Parafinic Diesel
(HVO).
It can be found on the Valeo website under Service/
Technical-Updates-TI/Heating systems
In case of air temperatures below 0°C a commercially
available winter Diesel fuel, at temperatures below -
18°C a Diesel for arctic climate conditions must be
used.
The usage of flow improvers respectively additives is per-
mitted. There are no negative influences due to additives
known.
ATTENTION:
While using the fuels, their operating limits must be
considered and if necessary, suitable measures
(nozzle preheating, electrical heated filter) should be
applied.
If fuel is supplied from the vehicle tank, follow the
vehicle manufacturer’s instructions on additives.
Fuel
Requirements
acc.
Remarks
Summer Diesel DIN EN 590
Winter Diesel DIN EN 590
Arctic Diesel and Diesel
for a strong winter climate
DIN EN 590
Bio Diesel (FAME)
*
DIN EN 14214 max. 20%
see TI Fuels
Paraffinic diesel fuel from
synthesis or hydro-gena-
tion (HVO)
*
DIN EN 15940 only selected
fuels
see TI Fuels

Related product manuals