Valeport 803 - Page 23

Valeport Ltd © 2019
Appendix 3 - Configuration Codes
Page 23
Code
Followed By Space and
Operation
#211
Nothing
Returns baud rate set into unit
#212
Output Format (units) <cr>
Sets the output format units- mm (mm/s), m (m/s) or
knots
#213
Nothing
Returns Output Format units mm/s, m/s or knots
#214
X_DAC_Cal_Knots<cr>
Sets X DAC cal for Knots
#215
Nothing
Returns X DAC cal for Knots.
#216
Y_DAC_Cal_Knots<cr>
Sets Y DAC cal for Knots.
#217
Nothing
Returns DAC cal for Knots.
#218
Speed
Sets both DAC output voltages for desired speed (only
used when in knots output mode). Factory set.