GLOBAL
12
Then, press the pedal toe down strongly and
press the PARA button to next step.
If the pedal is successfully calibrated, the
following prompt will be displayed. Press the
PARA button to confirm the calibration and
return to the previous menu.
If pedal calibration fails, press the the PARA
button to re-calibrate.
This menu is to set up USB audio settings when using GP- 100
as a USB audio interface.
Rec Level range: -20dB to +20dB, default: 0dB
Monitor Level range: -20dB to +6dB, default: 0dB
The Rec Mode options allow you to select USB recording input
sources on left (L) and right (R) input channels. The selections
for these are same: dry signal (Dry) and wet signal (Eect).
When recording, adjust the optimal Rec Level and Monitor
Level according to the instrument or other devices you're
using.
USB Audio
Then press the pedal all the way down (forward)
and press the PARA button to next step.
1/2
To Next Page
Loading...
Need help?
General