27
Other Interfaces
The 4100 Series is available with your choice of three common interfaces for remote data
acquisition. These include GPIB (IEEE-488.2), RS-232C, and a Centronics parallel printer
interface. These interfaces are for data acquisition only, and do not allow remote range control of
the ohmmeter.
The Centronics print-out option allows the ohmmeter to be connected to a variety of standard printer
types. The print-out style may be configured in a label format to include company name, model
number, serial number, time, date, test number and the measured data.
If your ohmmeter has been fitted with one of these optional interfaces, please refer to Chapter 12 for
operating instructions.
To Next Page
Loading...