17
When not to take your temperature
Lady-Comp uses its knowledge of your cycle and
available temperature values to calculate the future
cycle course and resulting from this, the fertility.
Increases in temperature due to flu, lack of sleep,
excess alcohol consumption and/or medication
with thermal effects are “abnormal” and will be
recognized by the device as such. Generally, it is
recommended to cancel the daily temperature
measurement in case of a fever, when taking
medication, or after a night of partying, so as not
to enter too many “abnormal” temperatures into
the device.
Fever display
If your temperature value is above 37.8 °C or 99.9 °F, the temperature display alternates with
the letter “F” for fever. Fever is recorded, however, the fever temperature value is not included
in the fertility calculation.
“Fever” display alternating
with temperature value
“Return” illuminated
Thermometer
symbol blinks
Temperature symbol
and alarm illuminated
Place temperature
sensor under your
tongue
Pressing the button
switches alarm off
+ starts measurement
Hold button for 3 sec.
after beginning to
stop measurement
Press “ok”
“Return”
Cancel temperature measurement
By pressing the “OK” button for 3 seconds the temperature reading will be canceled and
you return to the home screen. The temperature may be taken again while still within the
temperature measuring time period.
To Next Page
Loading...