23
**
6. CLI*
5. Monophase
7. Planning hits*
“Return” illuminated
Press “ok”
“Return”
1. Average cycle length
The average length of your menstrual
cycle is shown.
2. Average temperature rise
after ovulation
The average temperature rise after
ovulation is shown.
3. Ovulation range in days
The ovulation fluctuation in days is
shown.
4. Length of luteal phase
The average length of the luteal phase
is shown.
5. Number of monophase cycles
The number of monophasic cycles are shown.
If no ovulation takes place during a cycle,
Lady-Comp will indicate this by displaying
the “red” fertility indicator each day.
6. Number of cycles with CLI (CLI =
Corpus Luteum Insufficiency)
*
A corpus luteum insufficiency (CLI) will be
detected by Lady-Comp baby. The fertility
computer is able to recognize that the length
of the high level after ovulation is too short
or the temperature increase is low. This
information is important for planning a child.
7. Planning hits
*
Lady-Comp baby displays planning hits.
This is the number of times sexual inter-
course has corresponded with ovulation.
The number of hits over the last 20 cycles
is only shown when you activate “SI” Sexual
Intercourse.
*Only for Lady-Comp baby
Browse statistics Browse statistics
To Next Page
Loading...