41
– Do not place the device (even to dry) on/in a
heat source such as in a microwave oven, in
an oven, or on a radiator.
– Do not leave the computer in hot areas. Do not
place your computer for a long time in strong
sunlight or other UV light sources. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
plastic materials.
– Do not store the device in cold areas. If it
is then warmed again (back to its normal
temperature), drops of moisture can form
in the interior, which can damage the unit.
– Do not drop the device and protect it from
strong impacts or shocks to avoid equipment
damage.
– If the sensor, the sensor cable or the housing
is damaged, the appliance should not be used
further. A replacement sensor can be ordered
from your local distributor if it is defective,
dirty, or damaged.
– If these instructions are lost, they can be
reordered at any time via our website
or by phone.
– The product is not intended for outdoor use.
– A damaged sensor and excessive dust can
impair its function.
USB
– To read the data, only devices that are able
to read a “Mass Storage Device” USB device
are suitable. T his applies to most standard
PCs, laptops, and many tablet computers.
The USB connector may be used exclusively
for connection to such devices. While the
Lady-Comp is connected via USB, no use of
the device is possible.
The notes above apply equally to the temperature
sensor, the batteries, and the charger. If any of them
are not working properly, you can receive fast
and reliable help from our distribution companies.
Safety
– Strong electromagnetic fields (i.e. mobile
phones, amateur radio, or microwaves) can
affect the device function. The minimum
safety distance is 1.5 m.
– The device must not be connected to devices
other than those specified. These must comply
with the standard IEC60950-1, as this could
otherwise lead to the damage of the device
or risks (e.g. electric shock).
– Keep the device away from small children
and pets
.
– Make no modifications to the device.
– Use only within the specified operating
conditions and temperature range.