Valley Classic - Percent Timer Setting Calculation Worksheet

34
Valley Classic Control Panel
Operation
Percent Timer Setting Calculation Worksheet
1. Determine Machine Length.
SL = __________ feet SL = __________ Meters
2. Determine the End Tower Rotational Speed at 100% Timer Setting.
Speed = __________ ft/min Speed = __________ M/min
3. Determine Inches (millimeters) Per Day the machine will apply.
Inches Per = (GPM) (735.3) Millimeters Per = (LPS) (735.3)
___________ ___________
Day (SL)
2
Day (SL)
2
= ( ) (735.3) = ( ) (735.3)
_____________ _____________
( )
2
( )
2
= ( ) = ( )
________ ________
( ) ( )
= _______ = _______
4. Determine Hours Per Revolution at 100 Percent Timer Setting.
Hours Per = (0.105) (DLRDU in ft) Hours Per = (0.105) (DLRDU in M)
_________________ _________________
Revolution (Speed in ft/min) Revolution (Speed in M/min)
at 100% = (0.105) ( ) at 100% = (0.105) ( )
_____________ _____________
( ) ( )
= ( ) = ( )
________ ________
( ) ( )
= _______ = _______
5. Determine Inches (millimeters) Per Revolution at 100 Percent Timer Setting.
Inches per =
(Hours/Revolution) (In/Day) Millimeters per = (Hours/Revolution) (mm/Day)
____________________ ____________________
Revolution 24 Revolution 24
at 100% = ( ) ( ) at 100% = ( ) ( )
_______________ _______________
24 24
= ( ) = ( )
________ ________
24 24
= _______ = _______