Specifications VALMAR
Page 44
Model No. 2455
Hopper Steel welded, painted with acrylic enamel.
Dimensions Height 55 inches, Length 46 inches,
Width 48 inches
Capacity 40 cubic feet; 1800 lbs at 45 lbs per cubic foot density.
Weight (Empty) 800 pounds; hopper with hydraulic fan drive.
1300 pounds total shipping weight
Gear Box Ratios 60 speed gearbox with 5% difference between settings.
Refer to the chart for more information on ratios.
Tires 6-12 Ground Drive Tire (Approx. 892 revolutions per mile)
Inflate to 30 psi.
Engine Fan Drive Belt driven system. Belt size B70
11 hp Honda Engine with centrifugal clutch
Hydraulic Fan Drive Belt driven system. Belt size BX75
2.8 cubic in./rev. motor. Minimum flow requirement is 10.5 gpm (U.S.) for a fan
speed of 4000 rpm.
Metering Two metering rollers with shut of gate for each roller.
24 venturis. Manifold and venturis drop for easy calibration and emptying.
Electric Clutch 12 volt DC; 3.4 amps; 90 lbs torque capacity. Resistance is 2.4 to 2.8 ohms
(cold). Two clutches for complete or ½ shutoff of metering rollers and in-cab
control unit.
Electrical 12 volt D.C.; 10 amps standard version; 20 amps alternate version
Requirements
Operating Width 60 feet maximum @ 30 inch deflector spacing.
Model No. 3255
Hopper Steel welded, painted with acrylic enamel.
Dimensions Height 55 inches, Length 46 inches,
Width 60 inches
Capacity 50 cubic feet; 2250 lbs at 45 lbs per cubic foot .
Weight (Empty) 900 pounds; hopper with hydraulic fan.1405 pounds total shipping weight
Gear Box Ratios 60 speed gearbox with 5% difference between settings.
Refer to the chart for more information on ratios.
To Next Page
Loading...