Valmar EASY 3 TTi - Page 39

39
10. Now the machine works with speed 6. For
continue press START CYCLE button.
11. Now the machine works with speed 2. For
continue press START CYCLE button.
12. Now the machine works with speed 7. For
continue press START CYCLE button.
13. Now the machine works with speed 2. For
continue press START CYCLE button.
14. At last the machine works with speed 7.
With STOP button you can stop mixing – extraction (in any phase).
In the most programs the machine offer different modes of the extraction!
So for exemple you can use in program 01 these modes of extraction:
1. In running program you can use
modes.