11.3 PROCESSING CYLINDER DOOR
Lift the handle and shift it to the right to release the processing cylinder door.
The door can now be opened.
Close the door, lift the handle, shift it to the left and press it down to secure the
cylinder door in closed position.
11.4 OUTLET HOLE COVER
Loosen the locking screw by turning it in counter clockwise direction. Open the
the outlet hole cover by swinging the assembly to the right in counterclockwise
direction until hiting the limiter. Tighten the locking screw again to fix the outlet
cover in open position.
To Next Page
Loading...
