7.3.1.8 ICE CREAM button
The ICE CREAM button activates mixing and cooling of the ice cream
mixture in the production cylinder by pre selected program 01
2. The machine starts producing ice cream in
MODE 1(ice cream temperature and
density check).
During production you can change value of
MODE 1 (see chapter “PROGRAM
MODIFICATIONS AND SETTINGS”).
Production ends when set values are
reached. At the end of the cycle there is a
notifying beep. A message is displayed to
take out the ice cream. The machine will
keep ice cream consistency automatically
until extraction or until the end of the
maximum time limit.
7.3.1.9 Key STOP / RESET
The STOP button stops all active functions, operations or program
regardless of the current step.
The HOME screen is displayed.
To Next Page
Loading...
