8
MAINTENANCE
Debris from the chimney
The opening at the back of the appliance must be always kept clear
of obstruction. If the chimney has previously been used for coal
fires or is of normal construction it is possible that loose mortar
and soot can fall behind the appliance. This, in time, may build up
until the flue becomes restricted or even blocked. The chimney
should be checked annually to ensure continued clearance of the
combustion products and to ensure that no excessive build up of
soot or other debris occurs. The appliance should be serviced
regularly in order to ensure good mechanical operation.
It is important that this work is carried out by a competent person
such as a CORGI registered installer.
General servicing
If you require any attention to your fire, contact your supplier
mentioning the model number. It will also be helpful if the
appliance serial number is quoted. This will be found on a label
next to the control knob. It is visible when the bottom front cover
is removed.
In the United Kingdom it is the law that a landlord must have any
gas appliance and pipework which is situated in a tenant’s premises
checked for safety at least every 12 months. We recommend that all
gas appliances, wherever situated, are checked annually by a
competent person (In the UK, a CORGI registered installer).
The ceramic fuel bed items are customer replaceable. When
ordering please quote the number shown below.
Description Part No
Rear wall 545999
Front base coal halves 546009
Rear base coal 563359
Pack of 7 top coals 563369
Right side wall 546039
Left side wall 546049
When fitting replacement coals follow the instructions.
To Next Page
Loading...
Need help?
General
