Valor COALFLAME BR627 User Manual

600B607/05
OWNER’S GUIDE
AS SUPPLIED, THIS APPLIANCE IS FOR USE WITH NATURAL GAS (G20)
WHEN CONVERTED USING VALOR CONVERSION KIT NO.591159 THIS
APPLIANCE IS FOR USE WITH PROPANE GAS (G31)
THIS APPLIANCE IS FOR USE IN THE UNITED KINGDOM (GB) AND THE
REPUBLIC OF IRELAND (IE) ONLY.
This guide is intended to help you care for your Valor gas fire. Please read
thoroughly before using and keep for future reference
We trust that this guide gives sufficient details to enable the your appliance to be
operated and maintained satisfactorily. However, if further information is required,
our Valor AdviceLine will be pleased to help.
Please telephone 0345 626341 (Local call rates apply).
This guide to be left with the owner
© Valor Heating
COALFLAME
&
LIMOUSIN
MODEL BR627
(GC No. 32-032-22)
INSET LIVE FUEL EFFECT
GAS FIRE

Valor COALFLAME BR627 Specifications

General

Brand	Valor
Model	COALFLAME BR627
Category	Indoor Fireplace
Language	English

Summary

Safety Precautions and Installation

Gas Smell Emergency Procedure

Immediate actions to take if a gas smell is detected, including turning off supply and ventilation.

Installation Requirements

Mandatory installation by competent persons, adherence to Gas Safety regulations, and chimney preparation.

Hearth and Clearance Specifications

Requirements for hearth material, thickness, height, and minimum clearances from combustible surfaces.

Operational Safety Guidelines

Precautions regarding fire guards, handling hot parts, avoiding combustible materials near the fire, and wall coverings.

Operating Your Valor Gas Fire

Initial Use Observations

Notes on initial vapours, odours, and potential colour changes in ceramic coals during first use.

Oxysafe Safety System

Explanation of the Oxysafe device that monitors flame and flue conditions for safety.

Lighting the Fire

Step-by-step guide for lighting the gas fire using the FireSlide control and electronic ignition.

Alternative Lighting Method

Instructions for lighting the pilot flame with a taper if the electronic ignition fails.

Cleaning and Maintenance

Cleaning Metal Parts

Instructions for cleaning metal components using a damp cloth, advising against abrasive cleaners.

Cleaning Ceramic Coals

Guidance on cleaning ceramic coals safely, recommending gentle brushing in a ventilated area.

Cleaning the Ceramic Burner

How to clean the ceramic burner, advising careful use of a soft brush and vacuum attachment.

Battery Replacement

Procedure for replacing the 9V battery used for the electronic ignition system.

Regular Maintenance Checks

Importance of keeping flues clear and performing regular safety checks on gas appliances and pipework.

Fitting Ceramic Coals

Base Coal Positioning

Instructions for correctly placing the front and rear base coals within the burner compartment.

Arranging Loose Coals

Detailed steps for arranging the loose ceramic coals to achieve the correct visual effect.

Servicing and Support

Servicing Options in the UK

Information on authorized service providers, including Valor Service engineers and CORGI installers.

Ordering Replacement Parts

Guidance on contacting Valor Sales for replacement parts and the importance of using approved components.

Customer Assistance Contacts

Contact numbers for the Valor AdviceLine in the UK and for general enquiries in the Republic of Ireland.