6 www.vanatoo.com
UNPACKING YOUR SPEAKERS
When unpacking your speakers, inspect them to make sure that there is no visible
damage due to shipping. If you see damage, please contact us immediately. Please
check to make sure your shipment contains one of each of the following items:
Active speaker (control panel on back)1.
Passive speaker 2.
AC power cable 3.
3.5 mm to 3.5 mm cable4.
3.5 mm to RCA “Y” cable5.
Speaker wire6.
Owner’s Guide7.
DO NOT discard shipping materials. In the rare case that you must return the
speakers, they will need to be shipped in the original packaging. The shipping
box is collapsible for storage.
SETTING UP YOUR SYSTEM
You may have noticed the absence of a registration card. You are not required to
register your speakers. However, if you want us to send you updates or information
on future products, you’ll want to register as a Vanatoo customer at our website at
www.vanatoo.com.
Passive Speaker Back Plate Overview
# Feature Description
15 SPEAKER INPUT
TERMINALS
Passive speaker INPUT terminals. Connect these terminals to the
amplier OUTPUT terminals (7) on the active speakers using the
speaker wire provided.
4
3
5
6
15
To Next Page
Loading...
Need help?
General
