Vanco Evolution EVEXHDB1 - INTRODUCTION; HDBaseT Extender Features

www.vanco1.com
800.626.6445
3
INTRODUCTION
The EVEXHDB1 extender set consists of a transmitter and receiver. HDMI signals are input into the transmitter and
HDBaseT technology is used to transmit the audio/video signals to the receiver up to 70m via a single Cat5e/Cat6 cable
for 1080p and 40m at 4K 60Hz. The receiver then outputs the HDMI signal to the display. The EVEXHDB1 also allows
for bi-directional IR and power across the Cat5e/Cat6 cable. The extender set supports PoC, which can be used to power
either end of the extender set off of a single power supply.
FEATURES
HDBaseT™ Extender
Part # EVEXHDB1
• Features HDBaseT™ Technology, optimized for whole-home or commercial distribution of uncompressed
high-denition signals at more than twice the distance of standard HDMI cables without degradation
• HDBaseT Extender can connect uncompressed full HD digital video and audio through a single 230ft/70m
Cat5e/Cat6 cable
• Features Power over Cable (PoC) Technology which transmits power over Cat5e/6, allowing for either
Transmitter or Receiver to be powered without the use of a power supply. The result is an easy and
exible installation with low maintenance.
• Transmission Range: Extends 1080p resolutions up to 230ft (70m) over a single Cat5e/6 cable and
4K@60Hz, 4:2:0 color subsampling up to 131ft (40m)
• Bi-directional IR control
• High Bandwidth: 10.2 Gbps
• HDCP 2.2 compliant
• CEC Support
• Slim and compact design
• Power Supply: DC 12V
• Dimensions: 2.4” W x .9” H x 4.7” D