3. Click the Add button to assign the WPAN to the user.
4. On the Edit user settings page click Save.
Delete a WPAN personal alarm button
To delete the WPAN:
1. Go to Configuration > Hardware > Wireless > Transceiver list.
2. Click the Delete button beside the WPAN you want to delete.
17.9.2.4 WRMT remote control
The WRMT 4-button Remote is a device which allows a user to remotely operate the SPC system. The
device supports UNSET, FULLSET, PARTSET functionality, as well as the operation of defined outputs
and an SOS feature.
1 Fullset
2 Partset
3 Unset
4 Output
5 Panic/SOS
6 LED
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2018 225 A6V10276959-d
11.2018
To Next Page
Loading...
