Prerequisites
o
Mains power has failed
o
Battery power has failed
o
New batteries are available
1. Attach the battery leads.
2. Press and hold the PSU Kickstart button.
All LEDs flash.
3. Hold the PSU Kickstart button until the LEDs stop flashing.
4. Release the PSU Kickstart button.
PTC Fuse Reset
In the event of one of the PTC fuses resetting, you must manually disconnect then reconnect the mains
and battery connections.
SPC4xxx/5xxx/6xxx – Installation & Configuration Manual Smart PSU
© Vanderbilt 2018 67 A6V10276959-d
11.2018
To Next Page
Loading...
Need help?
General
