16 V44 Duo Installation & User manual
ENG
Buzzer on/off
This is how to deactivate the buzzer if sound on keypresses
and door opening is not desired. Note that the buzzer will
keep sounding during programming.
1 Press B and enter the current password.
2 Enter A65.
3 Enter 0.
To reactivate the buzzer, press 1 in step 3 instead.
Toggle function on/off
To be able to unlock a door permanently, the toggle function
has to be activated.
Proceed as follows:
1 Press B and enter the current password
2 Enter A81.
3 Enter 1.
4 Choose what relay outputs the toggle function should
apply to.
0 = both
1 = relay output 1
2 = relay output 2
To deactivate the toggle function, follow the above steps,
only enter 0 in step 3 instead.
In the Unlock the door permanently section you will nd
instructions on how to unlock the door permanently.
To Next Page
Loading...
