22 V44 Duo Installation & User manual
ENG
Enter duress code
This is how to activate the alarm output when forced to open
the door under threat:
Enter the usual entrance code, only add 1 to the last digit
in the code.
Example 1: If the entrance code is 1234, enter 1235 in
-
stead.
Example 2: If the code is 1239, enter 1230 instead.
When a duress code is entered, the door will open at the
same time as the duress output is activated. It will remain
activated until reset by somebody entering programming
mode.
To Next Page
Loading...
