Vanderbilt V44 Duo - Page 24

24 V44 Duo Installation & User manual
ENG
Programming overview
Always start by pressing B and entering the password. Exit: Press B. Function Step 1 Step 2 Step 3 Step 4 Step 5 Step 6
New entrance code
Press A21
Enter code loca
-
tion (2 digits). Code locations 21-30 = 6-digit codes.
Enter code (4 or 6 digits)
Enter timing group
0 = none 1 = group 1 2 = group 2
Enter relay output
0 = both 1 = relay 1 2 = relay 2
Next code: Proceed from step 2. Exit: Press B (back to programming mode).
Change entrance code
Press A22
Enter old code.
4-digit code: Enter code + A
Enter new code (twice)
Enter timing group
0 = none 1 = group 1 2 = group 2
Enter relay output
0 = both 1 = relay 1 2 = relay 2
Next code: Pro-
ceed from step 2. Exit: Press B (back to program- ming mode).
Erase entrance code
Press A22
See above Enter 0000
(00) (twice)
Press 0 Press 0 See above