Vankyo Performance 700 W - Specifications; Troubleshooting Guide; Common Issues and Solutions; Factory Reset Procedure

19
Specifications
Display
Technology
LCD
Light Source
LED
Resolution
Native 1920 x 1080
Input Signal
576i/720P/1080i/1080P
Aspect Ration
4:3/16:9/Auto
Focus
Manual
Keystone
±15°
Installation Type
Front/Rear/Ceiling
Speaker
5 W/4 ohm x2
Power Supply
AC 100-240 V, 50/60 Hz
Unit Dimension
290*220*93 mm
(11,4*8,7*3,7inches)
Unit Net Wight
2,23 kg (4,92 lbs)
Ports
USB Port x2 / HDMI Port x2 / Audio Out x1
Troubleshooting Guide
1. The content from Hulu, Netflix, and similar services cannot be mirrored or cast.
• Due to the copyright restriction from Hulu, Netflix, and similar services, the
contents MAY NOT be mirrored or cast.
2. What should I do if I want to watch the content from Hulu, Netflix, and similar services
via the projector?
• Please prepare a Fire TV stick, Roku stick or Chromecast™ (not included), then
connect it to the projector to watch the content.
3. Blurry Image
• Adjust focus ring/keystone.
• Projector and screen/wall must be in effective distance.
• 4. Remote Unresponsive
• Make sure remote points at IR receiver directly.
• Do not cover IR receiver.
• Replace the old AAA batteries with new ones.
5. Upside Down Images
• Go to Homepage > Settings > Projection Setting > Projection Mode to flip the
projection image.
6. Factory Reset
• Go to Homepage > Settings > System Setting > Restore Factory Default to restore
the projector to default settings.