vantiva OWM7111IOT - Tips and Tricks

10 11
4.4. IoT Functions
• The OWM7111 has three IoT radios that support several protocols such as
Zigbee, Bluetooth (BLE), and Thread.
• The three IoT radios are used to connect sensors and actuators dictated by
the applicaons you plan to use.
• Download the applicaon to your mobile device from the applicable app
store (Apple, Google, etc.) or use your favorite Web Browser (Microso Edge,
Google Chrome, Apple Safari, etc.) to access the Web App for the applicaon
you will use. Each applicaon will work with specic sensors to support the
funcons of the App.
• At rst the OWM7111 must be connected to the home or oce Wi-Fi
network as outlined in the preceding secons either as a stand-alone Access
Point or as part of an EasyMesh network.
• Aer that, your IoT applicaon will start to communicate with the OWM7111
and the integrated IoT radios to connect sensors and actuators.
• Once the sensors and actuators are connected, they will appear in your App
and the corresponding funcons of the App will begin to work.
5. Tips and tricks
5.1. Making a wired connection between the
OWM7111 and your Internet gateway
1 Connect one end of an Ethernet cable (not included) to the blue Ethernet
WAN port on the boom of your OWM7111.
2 Connect the other end of the Ethernet cable to the PoE port of the PoE
adapter.
3 Connect a second Ethernet cable (not included) to the LAN port of the PoE
adapter.
4 Connect the other end of the Ethernet cable to an Ethernet LAN port of your
Internet gateway.
5.2. Pairing the OWM7111 with your Internet gateway
Requirements
Make sure your OWM7111 isn’t onboarded already to an exisng EasyMesh
network, or paired with another Internet gateway.
Procedure
• Briey press the WPS buon on the OWM7111. The Wi-Fi LED on the
OWM7111 starts blinking green.
Step 1: Set up the Wi‑Fi extender
1 Connect one end of an Ethernet cable (not included) to the blue Ethernet
WAN port on the boom of your OWM7111.
2 Connect the other end of the Ethernet cable to the PoE port of the PoE
adapter.
3 Connect a second Ethernet cable (not included) to the LAN port of the PoE
adapter.
4 Connect the other end of the Ethernet cable to an Ethernet LAN port of your
Internet gateway.
Step 2: Connect your Wi‑Fi devices
If your Wi-Fi device:
• Supports WPS, use WPS to pair it with the OWM7111. For more informaon,
see “5.4. Pairing Wi‑Fi devices to your OWM7111”.
• Does not support WPS, congure it with the Wi-Fi network name (SSID) and
wireless key that you retrieve via the QR code printed on the product label of
the OWM7111.
Step 3: Step 3: Connect an Ethernet device (optional)
• You can use the OWM7111’s Ethernet LAN port to connect an Ethernet
device (for example, a Set-Top Box, a NAS drive or computer) to your network.
5.3. Joining your OWM7111 with an existing EasyMesh
network
Requirements
Make sure your OWM7111 isn’t joined already to an exisng EasyMesh network.
Procedure
1 Briey press the WPS buon on the OWM7111. The WiFi LED on the
OWM7111 starts blinking green.
2 Within two minutes, briey press the WPS buon on your Internet gateway