Page 4
1 Introduction
The UCW4026MCS and UCW4026MCS are setback tuner boxes (for the use of this manual both units are
referred to as boxes) intended for use with the DirecTV Advanced Entertainment Platform (AEP).
They will tune both RF signal (QAM) and multicast IPTV streams.
In addition to the STB the unit ships with a remote control, power supply, and HDMI cable.
The boxes ships with a basic set of applications or APK’s. DirecTV provides automated product updates,
additional APK’s, customization, monitoring, and control using the DirecTV Advanced Entertainment
Platform cloud services. To access these services, the boxes must be associated with a registered
COM51 on the property. Please work with your distributor in order to register your COM51 to the AT&T
AEP cloud prior to installation. Upon installation on a COM System with a properly registered and
configured COM51, the units will automatically connect to the AEP cloud via its network connection and
will be automatically associated with the property.
2 Connections
The boxes will connect to coaxial cable for QAM signal, and ethernet for Multicast IPTV.
Connection to the TV is via HDMI cable connected to the HDMI output.
MPI/MTI cables from commercial televisions connect to the MPI/MTI port.
There are two USB ports used for software updates.
A 3.5mm jack is provided for an IR remote control target.
Included power supply is to be connected to 12V DC input.
To Next Page
Loading...