Vantrue F1 User Manual

- 13 -
Menu Options
Note:
<1>. The mileage statistics analysis function is
based on the recording file in the current F1 SD
card, but if the card is formatted, or the recording
file does not have GPS information, the mileage
statistics analysis will not be possible.
<2>. Camera calibration line is used to adjust the
camera recording direction. When installing the
front and rear lens of the car, you can use this
function.
App setting menu
Sync phone
time
Sync phone time is turned on by
default, you can sync phone time
to F1 dashcam.
Language
English, French, Spanish, German,
Italian, Simplified Chinese, Russian,
Japanese, Korean can be set, and
the default language is English.
This setting contains Wi-Fi On Start,
Wi-Fi Auto Off, Wi-Fi Mode, Wi-Fi
Information.
Wi-Fi on start: default on, need to
open manually after closing
Wi-Fi auto shutdown: always on by
default, can choose 5 minutes or
10 minutes to shut down
Wi-Fi mode: open 5G Wi-Fi by
default, can switch to 2.4G Wi-Fi
Wi-Fi information: check Wi-Fi name
and Wi-Fi password
Wi-Fi
There are two resolution modes to
choose from, front+back and
front resolution.
Front+back default is resolution
2160P+1080P(HDR) 30FPS
Resolution

Vantrue F1 Specifications

General

Brand	Vantrue
Model	F1
Category	Dash Cameras
Language	English