Vantrue F1 User Manual

- 14 -
Off by default. When turned on,
you can integrate the front and
rear camera recording video into
one segment.
Video 2-in-1
The default is 1 minute, other
options can be selected. When
the SD card file storage is full, it will
overwrite the loops automatically.
Loop
Recording
Front of the car default is the
resolution 3840x2160P 30FPS
The default is +0.0, you can
increase the exposure value or
reduce the exposure value as
needed
Exposure
WDR
Crash Sensitivity Lock the sensitivity
of the recording, the default level
is 3, you can adjust the front and
back, left and right, up and down
different directions of the collision
sensitivity level respectively.
G-sensor
Indicator light is on by default
Indicator
light
The default is on, the car behind
the display screen for the mirror
image, off the display screen for
the original image.
Rear camera
mirroring
Support license plate setting in
Chinese, English and Japanese
License plate
number
setting
Voice Prompt Default is on
Default is on
Default is to display date and
time tag, make and model tag,
license plate tag, speed tag, GPS
location tag
Tag Stamp

Vantrue F1 Specifications

General

Brand	Vantrue
Model	F1
Category	Dash Cameras
Language	English