- 18 -
Critical event detection is triggered by the G-Sensor (Gravity Sensor) and
will auto-detect vehicle impacts and collisions. This will cause the camera
to protect the current video clip from being overwritten by locking it and
saving the footage in the “Video/Event” folder.
The user can also manually lock the current video recording session by
pressing the Button. A key icon will appear at the center of the screen.
The G-Sensor sensitivity is adjustable with 6 settings: 1,2,3,4,5 and OFF-it is set
to 3 by default. The G-Sensor can also be deactivated in “Record Setup” >
“G-Sensor”.
4.8 Event Recording
3
1440P+1080P+1080P
01-01-2021
Event videos are stored in the “Video/Event” folder, and cannot be
automatically overwritten.
NOTE: The camera will auto overwrite old Event videos once the Event
folder has accumulated 30% of the card capacity. Please regularly
transfer important videos to your PC or another storage location (e.g.
external hard drive). To maintain good read/write performance, the
microSD card should be formatted at least once a month.
To Next Page
Loading...
