- 22 -
NOTE: In Collision Detection + Motion Detection mode, if the dash cam is turned
off manully, it will turn on and record once it detects any vibration.
4.10.3 Motion Detection Triggered
When the Motion Detection has been turned on, this is represented by an
Motion Detection icon at the bottom right corner of the screen. If no
movement is detected after 5 minutes of recording, there will be an
orange P icon appears in the center of the screen which means Parking
Mode is activated. Once the front camera or inside camera detects
motion, 3 cameras will simultaneously start auto recording; they will stop
recording after 30 seconds of inactivity.
The Motion Detection is adjustable with 3 settings: Low, Medium and High.
Please go to “Record Setup” > “Parking Mode”> “ Motion Detection” to
change it for your need.
01-01-2021
3
1440P+1080P+1080P
In Motion Detection mode, if the dash cam is turned off manually, it will
not turn on and record even it detects any vibration.
In time lapse, the dash cam cannot enter the Motion Detection mode.
NOTE:
1.
2.
To Next Page
Loading...
Need help?
General
