Need help?Do you have a question about the Varian ProStar 510 and is the answer not in the manual?
General| Type | HPLC Pump |
|---|---|
| Flow Rate Accuracy | ±1% |
| Gradient Accuracy | ±0.5% |
| Display | LCD |
| Communication Interface | RS-232 |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Flow Rate Range | 0.001 - 10.0 mL/min |
| Pressure Range | 0 to 6000 psi |
| Weight | 30 lbs |
| Pumping Mechanism | Reciprocating piston |
Overview of the Varian ProStar 510 driver configuration and method building process.
Steps to install the Galaxie Drivers software, referencing the installation guide.
Procedures for configuring the driver in the Galaxie Configuration Manager.
Detailed instructions for setting up the Varian ProStar 510 instrument parameters.
How to create and configure the graphical synopsis of the system.
Guide to initiating the creation of a new method for data acquisition.
Configuring the specific control method for the ProStar 510 column oven.
Setting initial conditions and temperature gradients for the column oven.
Initiating a single data acquisition using the Quick Start function.
Steps for creating and starting sequences of multiple analyses.
How to monitor the real-time status and chromatogram of an acquisition.
Checking current operating state, temperature, and remote control of the oven.
To Next Page
