8.4 Filling the pump casing
Fill the pump casing completely with the liquid to be pumped through the opening on the top of the
casing (1). When the pump is stopped, the casing does not empty and therefore it is not necessary to
refill it.
8.5 Check fuel in fuel tank
WARNING
Always check fuel level in fuel tank. Don’t start the pump when fuel is running low.
In this case air can get in fuel system.
WARNING
Filling up the fuel, engine MUST be switched off.
8.6 Check oil level in engine
WARNING
Hot oil and components can cause personal injury. Do not allow hot oil or hot
components to contact the skin.
Note
Perform this maintenance engine must be stopped
1. Remove engine level dipstick (1) level must be above MIN level mark
2. If necessary to fill some oil, fill it through oil dipstick hole(1).
To Next Page
Loading...
