VarTech Systems VT190P2 User Manual

14
VT190DiamondVue/CrystalVueUser’sGuide150‐180
SPECIFICATIONS
ENGINEERING SPECIFICATIONS – DiamondVue
Panel Size 19.0” (48.26cm)
Type Active Matrix Color Thin Film Transistor (TFT)
Native Panel Resolution SXGA
Pixel Format 1280x3 RGB (H) x 1024 (V)
Pixel Pitch 0.294 per one triad (H) x 0.294 (V) mm
Pixel Arrangement RGB (Red dot, Green dot, Blue dot) vertical stripe
Active Display Area
14.816” x 11.853”
376.320mm x 301.056mm
Viewing Angle (Left/Right)
89/89
o
(typ.)
Viewing Angle (Up/Down)
89/89
o
(typ.)
Color Gamut TCO03 Compliance
Brightness 300 Nits (typ.)
Contrast Ratio 1300:1 (typ.)
Response Time 8ms (typ.)
Back Lights 4 CCFL rated 50,000 Hrs.
Video Connectors
Analog VGA (DB-15), Composite (BNC),
DVI-I, Four Pin Mini-Pin (S-VIDEO)
Colors Supported 16,777,216 (RGB 6-bit + Hi-FRC data)
Video Input Analog 0.7v p-p, TTL
Sync Separate H & V, Combined, SOG
Input Voltage 110/220VAC (+12VDC optional)
Power consumption 40 Watts
Temperature
Operating: 0 to 50ºC
Storage: -20 to 60ºC
Humidity
Operating: 10 to 95%NC
Storage: 10 to 95%NC
Operating Altitude
Operating: Up to 10,000 ft
Storage: Up to 40,000 ft

VarTech Systems VT190P2 Specifications

General

Brand	VarTech Systems
Model	VT190P2
Category	Monitor
Language	English