3
VT190DiamondVue/CrystalVueUser’sGuide150‐180
INTRODUCTION
SECTION 1
1.1 VT190 Series Features
The VT190 Series is capable of displaying 16.8M colors in a continuous spectrum.
The VT190 Series provides a standard VGA input, a DVI-I input, an S-Video input, and a Composite input.
The VT190 Series is auto synchronous adjusting the display to the appropriate VGA input.
The VT190 Series is available in Chassis Mount, Panel Mount, Wall Mount, and Rack Mount configurations.
The VT190 Series is supplied with an Anti-Reflective Screen unless equipped with an optional Touch System.
The VT190 Series has either 110/220VAC input or optional +12V jack supply as standard.
1.2 Product Safety Precautions
Ensure that sufficient space is available around the display to provide the circulation necessary for cooling.
Ensure that the ambient air temperature will not exceed the specified maximum temperature.
Do not attempt to service this display yourself. The rear chassis has a seal so that non qualified personnel
will not expose themselves to dangerous voltages or other risks.
To protect from electrical shock, unplug the display power supply from the wall before moving.
Do not expose the display to direct sunlight or heat.
Do not use this display near water.
Do not place any heavy objects on the power cords. Damage may cause electrical shock.
Unplug the power supply from the wall or unit if one of the following conditions exists:
Power cord or plug is damaged or frayed.
Liquid is spilled onto the display or the display is exposed to rain or water.
The display does not operate normally when the operating instructions are followed.
The display has been dropped or the enclosure has been damaged.
The display exhibits a distinct change in performance, indicating a need for service.
To Next Page
Loading...
Need help?
General
