Varytec ARC One - Erase a Password; DMX Table; DMX Table with 12 Channels

18 / 23
was turned off and has been turned on again.
The Default password is 988.
PassWord Lock
Proceed as with unlock but in this case choose
your own three numbers tos et a new password
to secure the unit from unwanted users.
Power off the fixture and turn it on again to
validate the changes.
With the UP/DOWN Buttons you can step to the next menu:
Menu 6
Re-Def- Press Enter to set back the unit to manufactureres settings.
With the UP/DOWN Buttons you can step to the next menu:
Menu 7
Reset Press Enter to reset the units functions
10.1. Erase a password:
To set back the password to default do as described here:
MENU→UP/ DOWN→MENU SYS-SET→ENTER→UP/ DOWN→SYS-SET Password→ENTER→UP/
DOWN→NO→ENTER→password(default 988)→ENTER
11. DMX Table
11.1. DMX Table with 12 Channels
Ch Value Function
1 0 – 255 Tilt
2 0 – 255 Tilt Fine
3 0 – 255 Dimmer 0 – 100%
4 0 – 255 Red Dimmer 0 – 100%
5 0 – 255 Green Dimer 0 – 100%
6 0 – 255 Blue Dimmer 0 – 100%
7 0 – 255 White Dimmer 0 – 100%
8 0 – 255 Strobe effects
9 1 – 7
8 – 14
15 – 21
22 – 28
29 – 35
Tilt Stand Alone Program 1
Tilt Stand Alone Program 2
Tilt Stand Alone Program 3
Tilt Stand Alone Program 4
Tilt Stand Alone Program 5