Varytec LED PAD 18 - Automatic Program Modes; Sound to Light Functionality

6 / 8
DMX
Channel
Value
Func
tion
1
0
-
255
Dimmer 0
-
100%
2
0
–
255
Dimmer for Red 0
–
100 %
3
0
–
255
Dimmer for Green 0
–
100%
4
0
–
255
Dimmer for Blue 0
–
100 %
5
0
–
255
Speed slow to fast
6
0
–
15
16 – 31
32 – 47
48 – 63
64 – 79
80 – 95
96 – 111
112 – 127
128 – 143
144 – 159
160 – 175
176 – 191
192 – 207
208 – 223
224 – 239
240 – 255
No Function
Scene mit R – G – B – RG – G
Scene mit G – GB – B – RB – R
Scene mit R – B – G – RG – G
Scene mit R – G – GB – RGB – G
Scene mit B – BG – RGB – RG – G
Color synchronized strobe
Color fade
Color change
Color change with strobe
Color Ramp down
Colour Ramp in
Colour triangular
Colour Glide
Sound 1
Sound 2
3.3. Automatic mode.
To enter the automatic mode push the ESC button. After that use the UP/DOWN buttons until
“auto” is shown in the display. Push ENTER to enter the menu Now the display shows „Aut x”. In
this case x stands for 1 or 2, means the automatic programs 1 and 2 which you can choose by
using the UP/DOWN Button. Push Enter to see the speed adjust menu. The display shows “SP x”
and x stands for a letter from 1 to 9, which is for adjusting the speed.
3.4. Sound to Light mode
to choose the sound to light mode, go on as you read here:
Push the ESC button first. Then use UP/DOWN buttons until you see “Soun” in the display. Push
ENTER You can read “Soux” in the display and with the UP/DOWN buttons you can choose
between the 2 sound programs. Push Enter to see the speed adjust menu. The display shows “SP
x” and x stands for a letter from 1 to 9, which is for adjusting the speed.