How to fix Vatech Medical Equipment if it is not turned on?
If your Vatech Medical Equipment device isn't turning on, first, try turning the power switch off and then back on. If that doesn't work, the battery might be discharged; in that case, recheck after charging the battery. If the issue persists, it could be due to a battery cable that is not correctly connected or a defective battery.
What to do if X-ray emission works, but exposure is too light or completely white on Vatech Medical Equipment?
If X-ray emission works, but the exposure is too light or completely white, it might be due to incorrect device positioning. Adjust the position of the device. Also, check if the exposure time is too long and decrease it if necessary. Ensure the receptor is correctly positioned; reposition it if it's facing the wrong way.
Why is the X-ray exposure too dark on my Vatech Medical Equipment?
If the X-ray emission works, but the exposure is too dark, it's likely the exposure time is too short. Increase the exposure time to resolve this issue.
What to do if there is no X-ray emission from my Vatech Medical Equipment?
If there is no X-ray emission from your Vatech Medical Equipment, it could be that the generator is cooling. Please wait for the cooling time to complete. Refer to ‘Duty Cycle’ for the appropriate waiting period.
Details the responsibilities and disclaimers of the manufacturer regarding device operation and safety.
Outlines user responsibilities for safety, testing, and maintenance of the device.
Explains symbols and formatting conventions used throughout the manual for clarity.
Identifies and describes safety marks, symbols, and their placement on the device.
Lists the standards and regulations the device complies with for safety and performance.
Provides fundamental safety precautions for operating the device and ensuring user safety.
Details critical warnings, cautions, and safety measures for users and patients.
Specifies the intended medical applications and patient types for the device.
Explains the underlying mechanism by which the X-ray system functions.
Defines the qualifications and knowledge required for the device operator.
Lists and describes the various parts and key capabilities of the device.
Provides a visual breakdown and identification of the device's main body parts.
Instructions for turning the device on and off.
Procedure for accessing the device using a numeric password.
Guide to selecting and using different operating modes of the system.
Detailed steps for correctly positioning the patient and imaging sensor for optimal results.
Steps for initiating an X-ray exposure and using the remote switch.
Information on checking battery status, charging, and replacement procedures.
Explains the device's automatic sleep and power-down functions to conserve battery.
Introduction to the service mode and its capabilities.
Steps to enter service mode and modify system settings.
Lists and describes various configurable parameters available in service mode.
Information on common error codes and steps to resolve operational issues.
Guidelines for safely cleaning the device's exterior surfaces.
Instructions for routine maintenance, cautions, and task checklists.
Information on environmentally responsible disposal of the device and its components.
Details the physical dimensions, weight, and build of the device.
Provides technical data for the X-ray generator, tube, battery, and charger.
Lists the electrical parameters, voltages, and current ratings of the device.
Defines the recommended operating and storage environmental conditions.
Instructions for attaching the device to a tripod using a holder.
Guide on how to assemble and adjust the rotating rectangular cover.
Default exposure time settings for various patient and tooth types.
Information related to the use of a PSP scanner with the device.
Comprehensive data on radiation dose measurements and leakage.
Details on the device's compliance with electromagnetic emission and immunity standards.
A glossary of acronyms and technical terms used in the manual.
General| X-ray Tube | Stationary Anode |
|---|---|
| Total Filtration | 1.5 mm Al equivalent |
| Sensor Type | Digital |
| Battery Type | Lithium-ion |
| Type | Portable X-ray unit |
| Image Sensor Compatibility | Compatible with digital sensors |
| SID (Source to Image Distance) | 20 cm |
| Battery Life | 300 exposures (at full charge) |
| Compatibility | Compatible with various imaging software |
To Next Page