What to do if Vatech Medical Equipment shows ‘PID 2XXX NO; #0 (Check Connection)’ error?
If you're seeing a ‘PID 2XXX NO; #0 (Check Connection)’ error message on your Vatech Medical Equipment, try these steps: First, disconnect the USB PC cable from the PC connector. Next, open the Windows Device Manager to verify the device is properly installed. If the issue persists, try using a different USB port on your computer.
General| Brand | Vatech |
|---|---|
| Model | EzSensor Classic |
| Category | Medical Equipment |
| Language | English |
General disclaimer regarding manual content updates and company responsibility.
Explanation of symbols used throughout the manual for clarity.
Essential safety precautions and guidelines for operating the EzSensor Classic.
Information on proper disposal of the product according to WEEE directives.
Overview of the EzSensor Classic system, including its specifications and features.
Detailed list and description of the components included with the EzSensor Classic.
Recommended PC hardware and software specifications for installation.
Procedure for installing the necessary software drivers, including connection and verification steps.
Instructions for mounting the EzSensor Classic holder for wall storage.
Guide to installing the EasyDent software for image acquisition.
General steps and considerations for acquiring dental images using EasyDent.
Patient registration, device selection, single, multi, and sequence shot image capture procedures.
Step-by-step guide for installing the EzDent-i software for image acquisition.
Procedure for activating the EzDent-i software license using a dongle or key.
Steps to activate the Consult DB license for utilizing video consultation features.
Pre-acquisition checks and sensor positioning for EzDent-i.
Patient registration, image acquisition, and viewing procedures in EzDent-i.
Guidelines for visually inspecting the device for damage or defects before operation.
Schedule and procedures for regular maintenance checks, including tests, connections, cable care, and resolution verification.
Procedures for cleaning and maintaining the sensor unit to prevent infection.
Important precautions to be observed during the use and maintenance of the device.
Procedure for reporting product complaints or issues to the distributor or manufacturer.
Guidance on recommended X-ray exposure settings for optimal image quality.
List of common error messages and their corresponding solutions.
Troubleshooting table with corrective measures for operational problems.
Information regarding electromagnetic emissions and immunity compliance of the product.
To Next Page