Vatech EzSensor Classic - 3.2 Installation of Software Driver

3.2
Installation of Software Driver
3.2.1
EzSensor Classic
This step is necessary
for the
Calibration data for the
EzSensor Classic
Windows device driver
. A Twain driver is also installed
Step 1
Insert the S/W
Installation CD in
the CD-ROM.
Setup should start
automatically.
If it does not, click Start>Run
and type
Homedirctory:\Console\
setup.exe
Step 2
The install program for ‘
IntraOral
USB-Sensor Acquisition
Software’
will appear. Click the
‘Next’ button.
To operate the intraoral sensor, you need to install the
Driver.
This Product
should be connected with the product
complied with IEC60601
10
Installation of Software Driver
EzSensor Classic
( IOS-U20VB, IOS-U15VB, IOS-U10VB)
Driver Setup
for the
installation of EzSensor Classic.
Capturing software and
EzSensor Classic
will be installed
and downloaded
. A Twain driver is also installed
during this step.
Installation CD in
Setup should start
setup.exe
IntraOral
will appear. Click the
To operate the intraoral sensor, you need to install the
EzSensor Classic
should be connected with the product
or the device
complied with IEC60601
-1
Driver Setup
Capturing software and
and downloaded
along with the
EzSensor Classic
or the device
which is