Need help?Do you have a question about the Vatech Green 16 and is the answer not in the manual?
General| Brand | Vatech |
|---|---|
| Model | Green 16 |
| Category | Medical Equipment |
| Language | English |
Outlines customer's roles in site planning and preparation for installation.
Details conditions under which VATECH assumes liability for installation and operation.
Explains symbols and warnings used in the manual for user and equipment safety.
Describes various symbols used to indicate hazards, compliance, and device information.
Lists international standards and regulations the equipment complies with.
Details necessary site conditions, visibility, and floor requirements for optimal installation.
Provides detailed electrical specifications and guidance for installation.
Specifies grounding, power line usage, and AVR recommendation for electrical setup.
Lists operational and storage requirements for temperature, humidity, and pressure.
Describes three options for installing the exposure switch for user convenience and safety.
Shows diagrams for base-stand and wall-mount installation types.
Guides on installing warning lamp and door interlock switch, referring to appendix.
Provides instructions for installing the emergency stop switch for safety.
Lists all necessary tools for the installation process.
Instructions for inspecting shipping damage indicators before opening packages.
Details the procedure for unpacking the main box and its contents.
Guides on verifying all parts and accessories are present using the layout and list.
Step-by-step guide to assemble the base and main units of the equipment.
Instructions for installing the optional CEPH unit.
Details on installing wall and column brackets for mounting.
Procedures for fixing the base onto concrete or wooden floors.
Instructions for connecting various cables to the equipment.
Step-by-step guide to remove safety bolts used during transportation.
Procedures for leveling the equipment using a spirit level for stability.
Final step to tighten bolts after leveling the equipment.
General guidance for installing the equipment using the wall mount option.
Details on installing wall and column brackets for wall-mount setup.
Instructions for connecting cables to the equipment for wall mount.
Steps to remove transportation safety bolts for wall mount.
Procedures for leveling the equipment for wall mount installation.
Final step to tighten bolts after leveling for wall mount.
Instructions for assembling base cover and base front cover.
Steps for attaching temple supports and chinrest to the unit.
Guides on installing UP/DOWN and Exposure Switch Holders.
Illustrates the connection diagram for the system components and PC.
Lists the minimum hardware and software specifications for the PC.
Steps to disable Windows Defender for software compatibility.
Guides on installing internal PC peripherals like the frame grabber board.
Instructions for connecting various cables from the equipment to the PC.
Prepares the PC and system for environment variable configuration.
Steps to disable the Windows Firewall to prevent interruptions.
Configuration to disable screen saver and set power options for system stability.
Steps to turn off User Account Control (UAC) for smoother operation.
Excludes necessary files and folders from anti-virus scans.
Prepares the PC by turning off the emergency stop and checking drivers.
Provides a flowchart illustrating the software installation sequence.
Instructions for installing the image viewer program.
Guides on installing the main software package via USB.
Steps to configure user information and settings for imaging programs.
Instructions to disable packing mode for the equipment to function.
How to select announcement modes (music/beep) for the equipment.
Provides detailed mechanical dimensions and specifications of the equipment.
Lists electrical specifications including voltage, frequency, and power rating.
Outlines the environmental conditions for operation, transport, and storage.
Detailed guide for installing warning lamps and door interlock switches.
Instructions on properly installing the emergency stop switch.
Procedure to limit the column height based on ceiling constraints.
How to connect a third-party exposure switch.
Guide to check and configure PC BIOS settings for optimal performance.
A comprehensive checklist for installation and site preparation.
To Next Page