Need help?Do you have a question about the Vatech PaX-i3D Green and is the answer not in the manual?
General| Detector Type | Flat Panel Detector |
|---|---|
| Type | Cone Beam CT |
| Imaging Technology | CBCT |
| Radiation Dose | Low dose |
| Software | Ez3D-i |
| Tube Voltage | 60-90 kV |
| Tube Current | Up to 10 mA |
| Scan Modes | High Resolution |
| Power Requirements | 220-240 VAC, 50/60 Hz |
| Scan Time | 5.9 - 24 sec (depending on mode) |
Provides essential safety guidelines for operating the equipment and handling patients.
Covers safety measures related to power sources, electrical connections, and device compatibility.
Details crucial safety protocols and responsibilities concerning radiation exposure.
Highlights critical warnings regarding imaging use, patient conditions, and equipment interaction.
Explains how to use the touch screen interface for parameter settings and operations.
Details the function and operation of the emergency stop button.
Guide to configuring exposure settings for PANO image capture.
Specific patient positioning steps for PANO Standard and Bitewing modes.
Procedure for positioning the patient for TMJ Open PANO imaging.
Procedure for positioning the patient for TMJ Close PANO imaging.
Steps for positioning the patient for Sinus PANO imaging.
Patient positioning steps for Lateral and Full Lateral CEPH views.
Patient positioning steps for Frontal (PA) CEPH views.
Patient positioning steps for SMV CEPH views.
Patient positioning steps for Waters View CEPH images.
Guide to configuring exposure settings for CT image capture.
Instructions for correctly positioning the patient for CT imaging.
Procedure for acquiring a SCOUT image for better patient positioning.
Flow chart and steps for initiating imaging using the SCOUT feature.
Procedure for initiating the X-ray exposure for CT imaging.
To Next Page