3. Before Installing the System
24 Green 16/18 Installation Manual
3. Before Installing the System
Please read checklist No.3 through No.6 in Appendix F
before or during the system installation.
3.1 Required Tools
The following tools are necessary to install the Green16/18.
Item Figure Size
Wrench Set
1.5 mm -10 mm
(0.06” - 0.4”)
T-shaped Hex
Wrench
6 mm - 10 mm
(0.24” - 0.4”)
Hex Wrench w/
Handle
6 mm - 10 mm
(0.24” - 0.4”)
Ratchet Wrench
Tips: 3 mm - 8 mm
(0.12” - 0.3”)
Needle-nose Pliers
Regular
Monkey Wrench
n/a
Cross Head Screw
Driver w/ Magnetic
Tip
L = 200 mm (7.9”)
Spirit Level
n/a
To Next Page
Loading...
