Vatech Green 16 - Manufacturers Liability

1. Introduction
2 Green 16/18 Installation Manual
1.2 Manufacturer's Liability
As the manufacturer, VATECH assumes liability for the safe and reliable installation
and operation of this equipment only when:
 Equipment installation, including software installation, was carried out by an
authorized agent following this installation manual.
 The electrical installation was carried out following the appropriate requirements
specified in IEC-60363.
 Genuine original or approved replacement parts are used.
 Maintenance/repair service has been performed by a qualified technician(s) from
one of our authorized agents.
 The equipment has been used under normal conditions following the user's
manual.
 PC Software has been properly used following the manufacturer’s installation
instructions and user manuals.