Pax-i3D Smart(PHT-30LFO) Installation Manual
78
6 Setting up PC
6.3
Installing the Internal Peripherals
Allow enough time to dissipate remnant energy after unplugging the power
cord from the main outlet or PC.
If the PC system is supplied with the equipment, the peripherals are already
installed inside the PC. Disregard this section
Whenever handling the ber optic frame grabber board:
1. Wear the ant-static glove.
2. Do not wear the likes of a thick jacket.
The following gures and descriptions are based on the PC model Z420 from
H P.
To Next Page
Loading...
Need help?
General
