Need help?Do you have a question about the Vatech PAX Duo3D and is the answer not in the manual?
General| Imaging Modes | 3D, Panoramic, Cephalometric |
|---|---|
| Scan Time (Cephalometric) | 10 seconds |
| Generator Voltage | 60-90 kV |
| Generator Current | 1-10 mA |
| Focal Spot | 0.5 mm |
| Detector Type | Flat Panel Detector |
| Type | CBCT |
| Voxel Size | 0.1 mm |
| Software | Ez3D-i |
Provides a general description of the PaX-Duo3D system and its capabilities.
Details the key features and advantages of the PaX-Duo3D system, including its 2-in-1 functionality.
Lists the hardware and software components included with the PaX-Duo3D system.
Explains the meaning of various symbols and marks used throughout the manual for safety and compliance.
Identifies and describes the main hardware parts of the PaX-Duo3D unit and their functions.
Presents the physical dimensions and layout of the PaX-Duo3D system.
Instructions for verifying package contents and checking for shipping damage indicators like ShockWatch and TiltWatch.
Details the components expected in Carton No. 1 of the PaX-Duo3D system.
Details the components expected in Carton No. 2 of the PaX-Duo3D system.
Provides a comprehensive list of accessories found in the accessory box for verification.
Illustrates and names the different positioning accessories provided for patient comfort and image quality.
Lists the necessary tools required for the installation process.
Illustrates the procedure for safely unpacking the system components from their cartons.
Step-by-step guide on how to assemble the main column and attach it to the base plate.
Instructions on how to ensure the unit is level and balanced on the floor for stable operation.
Details the process of attaching the protective covers to the assembled unit.
Guides on connecting various cables, including RS-232, power, and LAN, to the unit.
Specifies the minimum hardware and software requirements for the computer used with the PaX-Duo3D system.
Instructions for installing a LAN card into the computer for network connectivity.
Steps for properly connecting the LAN cable between the computer and the unit.
Guides on connecting the frame grabber and USB cables for data transfer and power.
Instructions for plugging in the USB license keys (HASP and WIBU) for software activation.
Step-by-step guide for installing the main imaging software and its associated frame grabber driver.
Details the installation process for the HASP HL Device Driver, essential for software licensing.
Instructions for installing the DirectX runtime components required for graphics and multimedia functions.
Guides on installing the driver for the serial communication card (SystemBase Multi-1/PCI).
Lists detailed technical specifications of the PaX-Duo3D system, including weight, dimensions, and scan parameters.
Provides technical details about the detector used for panoramic imaging.
Specifies the image magnification capabilities of the system for CT imaging.
Lists the available anatomic programs based on patient type, size, and jaw type.
Describes how the system's functions are controlled via the PC interface and voice instructions.
Details the specifications of the high-frequency X-ray generator.
Information about the primary collimator and its adjustability based on FOV.
Technical specifications for the X-ray tube, including voltage, current, and filtration.
To Next Page
