EasyManua.ls Logo

Vauxhall Combo 2010 - Vauxhall alarm system

Vauxhall Combo 2010
193 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29Keys, doors, windows
Vauxhall alarm system 3
monitors
z the doors, load compartm ent, bonnet,
z the passenger compartment,
z vehicle tilt, e.g. if it is raised,
z th e i g n it i on .
To activ ate
All doors, windows and the bonnet must be
closed. Press the p button on the remote
control again within 10 seconds of locking.
If the ignition was on, the drivers door
must be opened and closed in order to
activate the Vauxhall alarm system.
Act ivat ion without monitoring of
passenger compartment and vehicle tilt
Switc h on if, for example, you wish to leave
animals in the vehicle.
1. Close load compartment and bonnet.
2. Press button in front of the c ourtesy light
(with ig nition off); LED in the haz ard
warning light button flashes a maximum
of 10 seconds.
3. Close doors.
4. Switch on Vauxhall alarm system . LED
illuminates. After approx. 10 second s,
the system is activated without
monitoring of the passenger
compartment or vehicle tilt. The LED
fla shes until the system is switched off.
9 Warning
Do not activate the system if there are
people in the vehicle! The doors cannot
be unlocked from inside.
Ofrecido por www.electromanuales.com

Table of Contents

Related product manuals